The Inspector's Journal Forums
Username:
Password:
Save Password


Join TIJ Forums
Lost Password?
Subscribe to TIJ's Newsletter

All Forums > Technical Forums > Roof Forum >

Kick-out Flashing

Previous Topic: Different Roofing System ... - Topic - Next Topic: Response from seller part 2. New TopicReply to TopicShare Topic
Posted By  
View Profile
Evergreen Park (Chicago), IL
Posts: 1567
Joined: Apr, 2004
Currently offline offline
  
Thread Start First Page
[#1] Posted: 04/10/2012 - 1:08:20 PM
Reply with Quote
Is a kick-out flashing required (reference?) or is it a best practice? This roof had a kick-out at one of four valley corners.

Click to View

53.93 KB

Click to View

44.44 KB

Click to View

66.1 KB

Click to View

56.43 KB

Mike Lamb
http://www.inspection2020.com/
View Profile
Kenmore, WA
Posts: 15413
Joined: Dec, 2003
Currently online online
  
Kick-out Flashing
[#2] Posted: 04/10/2012 - 1:12:15 PM
Reply with Quote
I think it's a best practices for most roofers. However, kickout flashings and a 1-inch gap between siding and the end-cap on a gutter are mandatory for James hardie Siding Products; so if you don't have 'em the siding isn't installed to code.

ONE TEAM - ONE FIGHT!!!

Mike

View Profile
Collins, NY
Posts: 3168
Joined: Apr, 2008
Currently offline offline
  
Kick-out Flashing
[#3] Posted: 04/10/2012 - 1:41:11 PM
Reply with Quote
I don't see anything even remotely resembling best practice there.
Tom

http://clearcreekhomeinspection.com/

Life is tough enough as it is, it's tougher when your stupid. Don't do stupid things.
Dr Joe Lstiburek
View Profile
Lafayette, Louisiana
Posts: 3919
Joined: Nov, 2009
Currently offline offline
  
Kick-out Flashing
[#4] Posted: 04/10/2012 - 3:30:20 PM
Reply with Quote
I agree with Tom. It looks like domeritus. An error in either roof design or framing. A valley shouldn't run into a wall. The framer's pants needs a kick-out maybe.

Marc

"If Guam gets too overpopulated, it might tip over."
Congressman Hank Johnson (D) GA
Hoschton, GA
Posts: 65
Joined: Jan, 2007
Currently offline offline
  
Kick-out Flashing
[#5] Posted: 04/11/2012 - 8:22:55 PM
Reply with Quote
This guy has one of the best explanations of kickout flashing: http://www.kickout.info/irc.html

Where the arrow is located in the first picture, I would refer to that flashed location as "diverter" flashing. Further down where the gutter is located, I refer to that location as an area where "kickout" flashing is needed.

Hank Spinnler, ACI
Harmony Home
Inspection Services
Atlanta Georgia
www.HarmonyInspection.com
View Profile
indy, IN
Posts: 291
Joined: Jan, 2011
Currently offline offline
  
Kick-out Flashing
[#6] Posted: 04/12/2012 - 7:18:40 PM
Reply with Quote
The inspection I did today had vinyl siding and no kickouts GSAP . I pushed on the wall under the end of the gutter and the sheathing was noticeably softer.
   
Previous Topic: Different Roofing System ... - Topic - Next Topic: Response from seller part 2. New TopicReply to TopicShare Topic
Jump To:
The Inspector's Journal Forums © 2002-2013 all topics or replies that are posted on The Inspector's Journal
are copyrighted material of the original author that posted the topic or reply.
Go To Top Of Page 
 
Pick an RSS Feed

The views expressed on this website are the views of the authors and
do not necessarily reflect the views or policies of the sponsors.
© 2002-2013 Copyright DevWave Software Inc.
Find a Home Inspector

Powered By: Snitz Forums 2000