The Inspector's Journal Forums
Username:
Password:
Save Password

Join TIJ Forums
Lost Password? 		Subscribe to TIJ's Newsletter
: Join TIJ    : Rules    : FAQ    Newsletter [ Subscribe : Unsubscribe ]    : Members    : Stats    : Advertising    : Contact TIJ    : About TIJ
Forum [ Profile : PM Options : Subscriptions : Bookmarks ]     Home Inspector Locator [ Join : Edit Profile ]

All Forums > Technical Forums > Electrical Forum >

Surface mounted breaker boxes - Holmes show
Previous Topic: 12 Rule - Topic - Next Topic: CFUs in Closets New TopicReply to TopicShare Topic
Posted By  
charleston, sc
Posts: 33
 Joined: Feb, 2012
Currently offline offline
  
Thread Start First Page
[#1] Posted: 05/07/2012 - 05:43:49 AM		Reply with Quote
maybe its a Canada thing? On The Holmes HGTV show filmed around Toronto I think you frequently see the home's main breaker panel flat / surface mounted typically on a basement wall on a larger piece of plywood.
Most of the ones in the U.S, seem to be flush mounted, that is recessed into a wall. Is that US practice a code thing?
The Canada style makes the wires easier to get to as they are clearly visible, but maybe more likely to be damaged
Chestertown, MD
Posts: 214
 Joined: Apr, 2009
Currently offline offline
  
Surface mounted breaker boxes - Holmes show
 [#2] Posted: 05/07/2012 - 05:55:16 AM		Reply with Quote
Mounting the panel flush in the wall is not a code requirement. It can be mounted on the surface or flush. This is a design choice.
charleston, sc
Posts: 33
 Joined: Feb, 2012
Currently offline offline
  
Surface mounted breaker boxes - Holmes show
 [#3] Posted: 05/07/2012 - 06:15:06 AM		Reply with Quote
Thanks jim
View Profile
Denver, CO
Posts: 309
 Joined: Dec, 2005
Currently offline offline
  
Surface mounted breaker boxes - Holmes show
 [#4] Posted: 05/07/2012 - 12:17:24 PM		Reply with Quote
You'll see a lot of things on Mike Holmes show that differ from what you see in the field. Some differences (like the electrical panels) are regional. Others are just plain wrong. I caught a few minutes of a show last night where he said any exterior stairway of 3 or more steps is required to have a footing. Huh? I'm convinced that sometimes he just makes stuff up so he can keep talking in front of the camera.
Garet Denise
www.Cornerstone-Inspection.com

Our knowledge of wisdom exceeds our wise use of knowledge.
Chestertown, MD
Posts: 214
 Joined: Apr, 2009
Currently offline offline
  
Surface mounted breaker boxes - Holmes show
 [#5] Posted: 05/08/2012 - 06:42:50 AM		Reply with Quote
Don't forget the Mike is in Canada where the standards can be quite a bit different than here in the US.
View Profile
Victoria, British Columbia
Posts: 2450
 Joined: Nov, 2009
Currently offline offline
  
Surface mounted breaker boxes - Holmes show
 [#6] Posted: 05/08/2012 - 10:07:29 AM		Reply with Quote
Quote: Originally posted by Jim Port

Don't forget the Mike is in Canada where the standards can be quite a bit different than here in the US.
He is in Guelph, Ontario near Toronto. His sparky contractor mounts the breaker panel on its side on a blank wall in a full basement. Around here, that is only done if it's an upgrade in a tight space. But it is permitted.

They do all the framing with screws. Hopefully anyone copying them will use the expensive grades of screws, not just cheap deck screws.
www.allsafehome.ca
View Profile
Atlanta, ga
Posts: 125
 Joined: Apr, 2009
Currently offline offline
  
Surface mounted breaker boxes - Holmes show
 [#7] Posted: 05/09/2012 - 10:10:06 AM		Reply with Quote
I always worry about framing with screws in my own work because of expansion and contraction - and the number of screws that break because of too much force applied. It seems to me to be a bad move. One good building settle, the screws break, and there can be failure.

Anyway, I concur that in the US, surface or flush mount is OK per code. It is standard for panels to flush mounted for residences. Commercial panels are typically surface mounted. There is no telling what any particular engineer will spec for a certain building though. He can spec flush or surface mounted as he desires.
   
Previous Topic: 12 Rule - Topic - Next Topic: CFUs in Closets New TopicReply to TopicShare Topic
Jump To:
The Inspector's Journal Forums © 2002-2013 all topics or replies that are posted on The Inspector's Journal
are copyrighted material of the original author that posted the topic or reply.		 Go To Top Of Page 
 
Pick an RSS Feed

The views expressed on this website are the views of the authors and
do not necessarily reflect the views or policies of the sponsors.
© 2002-2013 Copyright DevWave Software Inc.
Find a Home Inspector

Powered By: Snitz Forums 2000