| Posted By |
|
|
|
| |
 |
Chicago, IL
Posts: 9553
Joined: Dec, 2003
|  offline
|
|
|
|
| |
 |
Crystal Lake, IL
Posts: 1181
Joined: Sep, 2003
| offline
|
|
|
|
| |
 |
Gaston, Oregon
Posts: 8139
Joined: Dec, 2003
| offline
|
|
 Hardie Backer
[#3] Posted: 04/15/2012 - 6:49:20 PM |  |  |
|
I doubt that you'll find much from Hardie, and if you do, it'll be along the lines of installing a mounting block, complete with flashing, and running the Hardie Panel all around it.
Is this a rain screen system?
Is there sheathing under the panels or are the panels the sheathing?
|
Jim Katen, Oregon
www.amipdx.com |
| |
|
|
| |
 |
Lafayette, Louisiana
Posts: 3919
Joined: Nov, 2009
| offline
|
|
Hardie Backer
[#4] Posted: 04/15/2012 - 7:31:47 PM | | |
|
I dunno anything but curious...by Hardie Board, did you mean panels or planks?
Marc
|
"If Guam gets too overpopulated, it might tip over."
Congressman Hank Johnson (D) GA |
| |
|
|
| | |
|
Chicago, IL
Posts: 9553
Joined: Dec, 2003
| offline
|
|
Hardie Backer
[#5] Posted: 04/15/2012 - 7:59:41 PM | | |
|
Right.....lap siding.
|
Kurt in Chicago
"If I smell it, it goes in the report".............Phillip Smith...2012
|
| |
|
|
| | |
|
Lafayette, Louisiana
Posts: 3919
Joined: Nov, 2009
| offline
|
|
Hardie Backer
[#6] Posted: 04/15/2012 - 9:02:15 PM | | |
|
Fiber cement is weak. I had a hard time nailing it according to Hardi's specs without breaking it recently when I put up about 1,000 SF of it. There's gaps behind the planks once its installed. Will snap much sooner than masonite. Structure needs to be brought out to the surface via solid blocks for attaching things. Exactly what Jim said.
Marc
|
"If Guam gets too overpopulated, it might tip over."
Congressman Hank Johnson (D) GA |
| |
|
|
| |
 |
Kenmore, WA
Posts: 15413
Joined: Dec, 2003
| offline
|
|
Hardie Backer
[#7] Posted: 04/15/2012 - 9:17:02 PM | | |
|
Hi Kurt,
Folks around here nail address plaques, name plates, etc. to Hardiplank all the time. It's generally not a problem if they use a fastener that can reach the studs behind the substrate as long as whatever it is doesn't weigh too much; but stuff like a flower box full of soil would probably need to be anchored to flashed mounting blocks.
ONE TEAM - ONE FIGHT!!!
Mike
|
| |
|
|
| | |
|
Chicago, IL
Posts: 9553
Joined: Dec, 2003
| offline
|
|
Hardie Backer
[#8] Posted: 04/15/2012 - 9:18:00 PM | | |
|
Sheathing under the siding.
You both are thinking what I'm thinking......designed blocking and flashing. This is a huge ass summer home community over in new buffalo....they all have their flotsam and stuff to hang.....can hear the moans now.....
|
Kurt in Chicago
"If I smell it, it goes in the report".............Phillip Smith...2012
|
| |
|
|
| | |
|
Gaston, Oregon
Posts: 8139
Joined: Dec, 2003
| offline
|
|
Hardie Backer
[#9] Posted: 04/15/2012 - 9:35:18 PM | | |
|
I'm sure it wouldn't be compliant, but what about making hangers that work like roof jacks?
I'm imagining a flat hanger with a pair of barbs at the top. You slip it up under the upper lap until the barb engages with the top of the lower lap. Then you hang whatever you want from it. There'd have to be a weight limit. If, at any point, it looks like they're causing a problem, you could easily get rid of them.
|
Jim Katen, Oregon
www.amipdx.com |
| |
|
|
| | |
|
Chicago, IL
Posts: 9553
Joined: Dec, 2003
| offline
|
|
Hardie Backer
[#10] Posted: 04/16/2012 - 05:31:10 AM | | |
|
Hmmmm.........that could be an interesting approach for a big development.
|
Kurt in Chicago
"If I smell it, it goes in the report".............Phillip Smith...2012
|
| |
|
| |
|
|
