The Inspector's Journal Forums
Username:
Password:
Save Password

Join TIJ Forums
Lost Password? 		Subscribe to TIJ's Newsletter
: Join TIJ    : Rules    : FAQ    Newsletter [ Subscribe : Unsubscribe ]    : Members    : Stats    : Advertising    : Contact TIJ    : About TIJ
Forum [ Profile : PM Options : Subscriptions : Bookmarks ]     Home Inspector Locator [ Join : Edit Profile ]

All Forums > Technical Forums > Electrical Forum >

Replacement FPE
Previous Topic: Disconnect? - Topic - Next Topic: Energized gas line New TopicReply to TopicShare Topic
Posted By  
View Profile
Crystal Lake, IL
Posts: 1174
 Joined: Sep, 2003
Currently offline offline
  
Thread Start First Page
[#1] Posted: 07/10/2012 - 6:54:52 PM		Reply with Quote
Saw a 1986 Federal Pacific panelboard with replacement Challenger Stab-Lok breakers installed, save the main disco being an FPE. Your sage thoughts? (FWIW, from what I googled, I still called for panelboard replacement.)
View Profile
Chicago, IL
Posts: 9505
 Joined: Dec, 2003
Currently offline offline
  
Replacement FPE
 [#2] Posted: 07/10/2012 - 7:28:10 PM		Reply with Quote
It's still the same crappy interface between breaker and bus, isn't it?
Kurt in Chicago

"If I smell it, it goes in the report".............Phillip Smith...2012
View Profile
Denver, CO
Posts: 307
 Joined: Dec, 2005
Currently offline offline
  
Replacement FPE
 [#3] Posted: 07/11/2012 - 4:49:28 PM		Reply with Quote
Are the Challenger breakers made with a different design than the original Stab-Loks?
Garet Denise
www.Cornerstone-Inspection.com

Our knowledge of wisdom exceeds our wise use of knowledge.
View Profile
Little Rock, AR
Posts: 1129
 Joined: Jun, 2007
Currently offline offline
  
Replacement FPE
 [#4] Posted: 07/11/2012 - 5:18:22 PM		Reply with Quote
Quote: Originally posted by Garet

Are the Challenger breakers made with a different design than the original Stab-Loks?
The guts might be different (I don't know) but as Kurt alluded, the physical interface between the breaker and bus bar is still problematic due to poor contact issues. That can't be different IF the original bus bars are in place, and I'd bet my last dollar that they are. That would be more trouble to change than it would be worth. And there are definitely other companies making replacement breakers. I found some that were made in China.

Personally, I can't imagine too many things worse than a Chinese knockoff of an already defective product.
Kevin

"Politicians are interested in people. Not that it is always a virtue; fleas are interested in dogs." P.J. O'Rourke
Chico, CA
Posts: 21
 Joined: Dec, 2009
Currently offline offline
  
Replacement FPE
 [#5] Posted: 07/15/2012 - 4:15:27 PM		Reply with Quote
Quote: Originally posted by Jerry Simon

Saw a 1986 Federal Pacific panelboard with replacement Challenger Stab-Lok breakers installed, save the main disco being an FPE. Your sage thoughts? (FWIW, from what I googled, I still called for panelboard replacement.)


Challenger Electrical Equipment Corp. did buy Federal Pacific Electric, but what did happen later I dunno. It is rather strange that the two most reviled names in electrical equipment were joined, Challenger was a successor to Zinsco. There are not too many who have good things to say about Zinsco or FPE.
   
Previous Topic: Disconnect? - Topic - Next Topic: Energized gas line New TopicReply to TopicShare Topic
Jump To:
The Inspector's Journal Forums © 2002-2013 all topics or replies that are posted on The Inspector's Journal
are copyrighted material of the original author that posted the topic or reply.		 Go To Top Of Page 
 
Pick an RSS Feed

The views expressed on this website are the views of the authors and
do not necessarily reflect the views or policies of the sponsors.
© 2002-2013 Copyright DevWave Software Inc.
Find a Home Inspector

Powered By: Snitz Forums 2000