| Posted By |
|
|
| |
 |
Gaston, Oregon
Posts: 8091
Joined: Dec, 2003
|  offline
|
|
|
|
| | |
|
Gaston, Oregon
Posts: 8091
Joined: Dec, 2003
| offline
|
|
|
|
| |
 |
Chicago, IL
Posts: 9507
Joined: Dec, 2003
| offline
|
|
 KBHI Says Calling FPE Panels is Irresponsible
[#29] Posted: 12/05/2007 - 12:54:48 PM |  |  |
|
I have no excuse........
Image Insert:
91.37 KB..
|
Kurt in Chicago
"If I smell it, it goes in the report".............Phillip Smith...2012
|
| |
|
|
| | |
|
Gaston, Oregon
Posts: 8091
Joined: Dec, 2003
| offline
|
|
|
|
| |
 |
Lexington, KY
Posts: 2538
Joined: Nov, 2004
| offline
|
|
KBHI Says Calling FPE Panels is Irresponsible
[#31] Posted: 12/05/2007 - 1:47:52 PM | | |
|
The link below contains minutes from a KBHI board meeting in which the FPE panels were discussed. Check out the middle of the second page.
I typically would have more to say, but this wonderful forum is, after all, open for public consumption.
http://www.ohbc.ky.gov/NR/rdon...2007.pdf
|
| |
|
|
| |
 |
DeWitt, Mi
Posts: 3305
Joined: Jan, 2004
| offline
|
|
KBHI Says Calling FPE Panels is Irresponsible
[#32] Posted: 12/05/2007 - 2:23:16 PM | | |
|
This whole issue is silly for 49 states and deadly serious for Kentucky! Who are these people and are you people in Ky paying them?
|
Les
|
| |
|
|
| |
 |
Elizabethtown, PA
Posts: 621
Joined: May, 2007
| offline
|
|
KBHI Says Calling FPE Panels is Irresponsible
[#33] Posted: 12/05/2007 - 2:40:06 PM | | |
|
1. Does that mean that if a KY home inspector calls out an FPE panel as a safety hazard, that he risks having his licensed revoked? OR,
2. Do they just want the inspector to note it as a potential safety issue and require the inspector to recommend a licensed electrician make the final call?
Isn't number 2 what most of us do anyway?
Didn't know state inspector boards had this much power to tell inspectors in their state how they were supposed to run their business.
|
Matthew Steger
WIN
"Common sense is not so common." |
| |
|
|
| | |
|
Gaston, Oregon
Posts: 8091
Joined: Dec, 2003
| offline
|
|
|
|
| |
 |
Kenmore, WA
Posts: 15396
Joined: Dec, 2003
| offline
|
|
KBHI Says Calling FPE Panels is Irresponsible
[#35] Posted: 12/05/2007 - 2:44:38 PM | | |
|
Quote: Originally posted by kurtI have no excuse........ Image Insert: 91.37 KB..
OT - OF!!!
M.
|
| |
|
|
| |
 |
Spring Hill (Nashville area), Tennessee
Posts: 3384
Joined: Nov, 2003
| offline
|
|
KBHI Says Calling FPE Panels is Irresponsible
[#36] Posted: 12/05/2007 - 3:05:43 PM | | |
|
Quote: Originally posted by BainThe link below contains minutes from a KBHI board meeting in which the FPE panels were discussed. Check out the middle of the second page. I typically would have more to say, but this wonderful forum is, after all, open for public consumption. http://www.ohbc.ky.gov/NR/rdon...2007.pdf
Well that's a fun read! I can't believe that the "Board" has to approve all applications and that they spent time on folks who did not renew their license! Simply astounding that this board works like that. A person should get their license once the satisfy all of the listed requirements. It should be an automatic approval if everything is met. This could be and should be done by a clerical person.
|
Scott Patterson
http://www.traceinspections.com
"Minds are like parachutes they only function when open"
|
| |
|
|
| | |
|
Portland / Bend / Salem, Oregon
Posts: 74
Joined: Jan, 2004
| offline
|
|
KBHI Says Calling FPE Panels is Irresponsible
[#37] Posted: 12/05/2007 - 3:37:43 PM | | |
|
As luck would have it, I was up at 3AM for my "old man" house walk and noticed 2 rooms with no power. Checked the main panel and no tripped breakers were noted. I reset the offender and lights on! Power on but as an added extra there was this beautiful blue color coming from the panel interior (think Haight Ashbury colors) for 15 seconds. Shut off breaker and back to bed after some checking. Next afternoon after work I removed tha panel cover and found the breaker connecting wire missing 8" of insulator - as in gone. Wire had melted thru. Electrician is changing out panel this week! Yes, I have been adament about replacing these panels forever but "do as I say, not as I do" prevailed. It was a FP stablok. At least it gave us the impetus to collect all needed house papers and pictures - now they are near the door!! In all the excitement I forgot pictures - they would have been perfect to send to Kentucky.
Merry Christmas to all from a not so politically correct Oregon Home Inspector.
|
| Paul in Portland |
| |
|
|
| |
 |
Little Rock, AR
Posts: 1131
Joined: Jun, 2007
|  online
|
|
|
|
| | |
|
Nashville, TN
Posts: 1375
Joined: May, 2007
| offline
|
|
KBHI Says Calling FPE Panels is Irresponsible
[#39] Posted: 12/05/2007 - 5:13:45 PM | | |
|
Quote: Originally posted by BainQuote: Originally posted by ScottpatQuote: Originally posted by BainThe link below contains minutes from a KBHI board meeting in which the FPE panels were discussed. Check out the middle of the second page. I typically would have more to say, but this wonderful forum is, after all, open for public consumption. http://www.ohbc.ky.gov/NR/rdon...2007.pdfWell that's a fun read! I can't believe that the "Board" has to approve all applications and that they spent time on folks who did not renew their license! Simply astounding that this board works like that. A person should get their license once the satisfy all of the listed requirements. It should be an automatic approval if everything is met. This could be and should be done by a clerical person. Yep.
Where's their source for the statement that calling out an FPE panel is beyond the scope of HI work?
I've told dozens of people to rip these things out. If TN told me I couldn't recommend rip-outs, I'd still tell people to rip 'em out.
I mean, really, what are they gonna do to me? Toss me out of the HI business? Oh, please, don't throw me in that briar patch.
WJ
|
| |
|
|
| |
 |
Virginia Beach, VA
Posts: 551
Joined: Nov, 2007
| offline
|
|
KBHI Says Calling FPE Panels is Irresponsible
[#40] Posted: 12/05/2007 - 6:50:04 PM | | |
|
Just curious as I'm not sure how these boards really work, but is it possible to sue them? I know thats a lot of money, just asking.
|
 |
| |
|
|
| | |
|
Kenmore, WA
Posts: 15396
Joined: Dec, 2003
| offline
|
|
KBHI Says Calling FPE Panels is Irresponsible
[#41] Posted: 12/05/2007 - 6:58:49 PM | | |
|
Hi All,
I'm disappointed to learn that the former President of NAHI, Ralph Wirth, is on that board and mixed up in this, but that still doesn't change my opinion. Since he's the honcho on that board he is now the head pinhead as far as I'm concerned.
I say again, just shine a light on it. It was done behind closed doors. They never asked for the input of the inspectors in the state, before they created this oh-so-convenient-for-the-sellers-and reel-tours-rule. It's goofy and it's a disservice to the consumer. They can paint it any way they want and I'll still believe that it was done to plander to special interests.
Get it out in the open so their little "arrangements" are revealed and see what happens. The North Carolina boys and girls have already shown you what to do. Now do it better than they did.
ONE TEAM - ONE FIGHT!!!
Mike
|
| |
|
|
| |
 |
Albany, NY
Posts: 356
Joined: Nov, 2005
| offline
|
|
KBHI Says Calling FPE Panels is Irresponsible
[#42] Posted: 12/05/2007 - 7:38:04 PM | | |
|
| Quote: Originally posted by SonOfSwamp
Now, with apologies to the author of the words below, the text is a glaring example of what happens when people who don't write carefully shoot themselves in the feet, shins, thighs and balls...
"I point this out for the benefit of those who want to take the fight to the KBHI. I suggest you acknowledge that all FPE stuff is not bad but point out that there are problems associated with specific components from that manufacturer (Stab-Lok). IMO it will make your argument more compelling and credible.
No, no, no. The above would destroy an HI's credibility. The words "all FPE stuff is not bad" actually mean that everything that FPE ever made is good. The correct wording would have been something like, "not all FPE stuff is known to be defective." That means that some FPE might just be bad. It's a critical distinction, and it requires critical thinking.
No apology is necessary. As soon as I read the part you highlighted in red, I cringed, even before I got to your explanation. That was sloppy writing.
I'll have a side of crow to go along with that slice of humble pie.
|
| |
|
|
| | |
|
Nashville, TN
Posts: 1375
Joined: May, 2007
| offline
|
|
|
|
| | |
|
Spring Hill (Nashville area), Tennessee
Posts: 3384
Joined: Nov, 2003
| offline
|
|
KBHI Says Calling FPE Panels is Irresponsible
[#44] Posted: 12/06/2007 - 05:52:24 AM | | |
|
A little more information that was published on a private board, as the person is a licensed KY inspector and does not want to get on the bad side of those that control his/her license:
Quote: A relocation inspection company approached the Kentucky Board of Home Inspectors some time back (early this year?) seeking approval of their ERC form which had a question on it about whether or not the electrical panel was an FPE. Discussion among the KBHI board members ensued and they decided to ask the state electrical advisory committe. Who asked or brought it up as an issue. I don't know. The state electrical board, in the person of Ken Leathers, Chief Electrical Inspector, apparently got ahold of the "release concerning FPB panels from US Consumer Product Safety Commission, March 3, 1983 (Release *83-008). " Partial meeting minutes that started the ball rolling : Quote: ELECTRICAL ADVISORY COMMITTEE MEETING
Amended Minutes from April 17, 2007 (as approved by the OHBC Board on May 31, 2007)
Office of Housing, Buildings & Construction
Electrical Section
101 Sea Hero Road, Suite 100
Frankfort KY 40601
MEMBERS PRESENT
Bobby Hamilton, Chair
Michael T. Leake
Garry Sebastian
Tim Parsons
Robert Matthews
Sal Santoro
Raymond Cornelison
Gary Osborne
Michael Billow
Quote:
Federal Pacific Electric Company stab-lok breakers memorandum: Home Inspectors telling homeowners that FPE panels should be replaced due to fire hazard.
Mr. Ken Leathers received a release concerning FPB panels from US Consumer Product Safety Commission, March 3, 1983 (Release *83-008).
Several members stated that there was no documentation present that alluded to the fact that the panel was a fire hazard yet the Committee itself takes no liability in stating that the panel is a safe panel.
First motion made to have Ken Leathers with aid of Terry Slade draft letter stating Committee’s statement about breaker panel boxes: Robert Matthews
Second motion made to accept: Tim Parsons
Motion carried.
Things kinda went from there, but I don't have all the details of how it got to where it is now
|
Scott Patterson
http://www.traceinspections.com
"Minds are like parachutes they only function when open"
|
| |
|
|
| |
 |
Columbus, Mississippi
Posts: 3169
Joined: Dec, 2003
| offline
|
|
KBHI Says Calling FPE Panels is Irresponsible
[#45] Posted: 12/06/2007 - 06:27:57 AM | | |
|
Originally posted by sepefrio
Just curious as I'm not sure how these boards really work, but is it possible to sue them? I know thats a lot of money, just asking.
It's generally true that you cannot sue the individual who works for a government entity, but you usually can sue the entity. Activists have a long history of doing just that. If you wanted to attack that way: tell everyone how bad FPE is, make sure they know you're doing it, hope they take action against you, then sue and drag them into open court where you can expose them. All of which would be expensive, but probably effective.
Brian G.
Justice Ain't Cheap 
|
| www.accuspecllc.com |
| |
|
|
| |
 |
West Bend, Wisconsin
Posts: 189
Joined: May, 2005
| offline
|
|
KBHI Says Calling FPE Panels is Irresponsible
[#46] Posted: 12/07/2007 - 05:17:57 AM | | |
|
I have Doug Hansen's article linked to my canned statement for FPE panels. It automaticaly gets printed with my report and handed to my client. I also include it as an attachment to any party that I emailed a copy of the report to. I have not had one call since I have started using this article.
|
Carl Eisen
Appletree Home Inspections LLC
www.appletreeinspections.com
"When you come to a fork in the road, take it."
- Yogi Berra
|
| |
|
|
| |
 |
Ft. Lauderdale, FL
Posts: 349
Joined: Jan, 2004
| offline
|
|
KBHI Says Calling FPE Panels is Irresponsible
[#47] Posted: 12/07/2007 - 07:38:00 AM | | |
|
I understand KBHI is now discussing polybutylene piping as not all polybutylene piping will leak.
CCD
|
| |
|
|
| | |
|
Kenmore, WA
Posts: 15396
Joined: Dec, 2003
| offline
|
|
KBHI Says Calling FPE Panels is Irresponsible
[#48] Posted: 12/07/2007 - 08:13:40 AM | | |
|
Hi,
Unbolted and unflashed deck ledgers too because not all unbolted and unflashed deck ledgers separate and allow decks to collapse. 
OT - OF!!!
M.
|
| |
|
|
| | |
|
Nashville, TN
Posts: 1375
Joined: May, 2007
| offline
|
|
KBHI Says Calling FPE Panels is Irresponsible
[#49] Posted: 12/07/2007 - 11:10:34 AM | | |
|
| Quote: Originally posted by msteger
2. Do they just want the inspector to note it as a potential safety issue and require the inspector to recommend a licensed electrician make the final call?
Isn't number 2 what most of us do anyway?
Call me crotchety, but I'm not so sure that calling something in an FPE panel a "potential safety issue" stands up to logic. Where's the "potential?" If there's a visible problem -- and/or documentation of past problems with arcing/burning FPE panels, there's a safety issue, plain and simple.
I don't know what most HIs do, but once I read the Hansen article, I figured I had sure-shot expert opinion that was strong enough to make me recommend removing and replacing FPE panels.
Hansen's a published, peer-reviewed expert; his opinions have considerable weight. I'd much rather rely on Hansen's opinion than the opinion of a local-yokel electrician or some pinhead(s) on the KY HI board.
I have always preferred making a straight-up recommendation rather than referring customers to a "licensed qualified" hairdresser, which inevitably turns out to be a lackey who turns out to be the reeltor's handyman.
In the immortal words of Mark Cramer, "If you know the answer, give the answer."
But that's just me,
WJ
|
| |
|
|
| | |
|
Kenmore, WA
Posts: 15396
Joined: Dec, 2003
| offline
|
|
KBHI Says Calling FPE Panels is Irresponsible
[#50] Posted: 12/07/2007 - 11:31:05 AM | | |
|
FWIW,
I heard from Douglas about this the other night. He's going to update his FPE paper to included the court developments and research that have been done since he first wrote it.
Once that's done, I think it will be all a home inspector needs to shine a light on the motives of the pinheads.
OT - OF!!!
M.
|
| |
|
|
| | |
|
Columbus, Mississippi
Posts: 3169
Joined: Dec, 2003
| offline
|
|
KBHI Says Calling FPE Panels is Irresponsible
[#51] Posted: 12/07/2007 - 11:47:17 AM | | |
|
Originally posted by hausdok
I heard from Douglas about this the other night. He's going to update his FPE paper to included the court developments and research that have been done since he first wrote it.
Outstanding. Can someone send it to the KY board members, just so they can't say "We never saw this"?
Brian G.
Address It To "Your Ignorance"
|
| www.accuspecllc.com |
| |
|
| |
|
