Chad Fabry Posted March 8, 2018 Report Share Posted March 8, 2018 One of 7 panels at a former VFW. And then there's the 3-phase service 3-feet above the flat roof. 1 Quote Link to comment Share on other sites More sharing options...
John Ghent Posted March 8, 2018 Report Share Posted March 8, 2018 (edited) I hope you charged an extra $20 for that. Are all the panels 3phase? Edited March 8, 2018 by John Ghent 2 Quote Link to comment Share on other sites More sharing options...
Jim Baird Posted March 8, 2018 Report Share Posted March 8, 2018 ...outside paint looks mighty fresh. Is this a typical flip? Quote Link to comment Share on other sites More sharing options...
Chad Fabry Posted March 8, 2018 Author Report Share Posted March 8, 2018 2 hours ago, John Ghent said: I hope you charged an extra $20 for that. Are all the panels 3phase? All except 2 were 3 phase. Jim, not a flip. 20,000 sf facility w/ bar, restaurant and party room, now being used as mercantile. Quote Link to comment Share on other sites More sharing options...
Marc Posted March 9, 2018 Report Share Posted March 9, 2018 Closet too congested, difficult to service should it be needed. What configuration is it? Delta, Wye, unbalanced neutral? Quote Link to comment Share on other sites More sharing options...
Chad Fabry Posted March 9, 2018 Author Report Share Posted March 9, 2018 11 hours ago, Marc said: Closet too congested, difficult to service should it be needed. What configuration is it? Delta, Wye, unbalanced neutral? Too congested? Don't you think that's harsh? I mean, you can see the required light over the panel still. It is a Wye configuration. Quote Link to comment Share on other sites More sharing options...
Tom Raymond Posted March 9, 2018 Report Share Posted March 9, 2018 I especially liked the light. Made me grin. Quote Link to comment Share on other sites More sharing options...
John Dirks Jr Posted March 13, 2018 Report Share Posted March 13, 2018 About those service entrance cables. It looks like they are not high enough above the low slope roof. I bet the cables were there first, then somebody built the addition on the rear of the structure which causes clearance concerns with the cables. Quote Link to comment Share on other sites More sharing options...
Chad Fabry Posted March 14, 2018 Author Report Share Posted March 14, 2018 On 3/12/2018 at 8:44 PM, John Dirks Jr said: About those service entrance cables. It looks like they are not high enough above the low slope roof. I bet the cables were there first, then somebody built the addition on the rear of the structure which causes clearance concerns with the cables. I assume that's what happened. I liked all the exposed wire the best. It made it super easy to determine the service entrance wire type. Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.47289739c2f0532f4faffd07858bee59.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.