Jump to content

Foundation support for a masonry chimney chase


Recommended Posts

Is it permissible to support a masonry chimney chase with a 24" poured concrete foundation that's attached to the house foundation with rebar?

The location is Chicago and the frost line is 45".

I don't have any pictures, a sewer contractor that's working on my daughter's house called me today and said that he had never seen anything like this before. There are no wing walls or a 45 degree wall that rests on the footing.

The chase is approximately 24' high and 48" wide.

Jeff

Link to post
Share on other sites

Thanks Mike,

I was hoping to get lucky and find someone who had seen something like this before. I was able to get to the site early today and have taken some pictures.

Here are some establishing shots:

Split face masonry chimney chase:

Click to Enlarge
tn_2010812131828_photo%208.jpg

70.36 KB

Lower portion of the chase:

Click to Enlarge
tn_2010812131937_photo%204.jpg

87.61 KB

Exposed lower portion of the chase:

Click to Enlarge
tn_2010812132148_photo%203.jpg

80.44 KB

The foundation for the house goes down another 24" below grade. Every masonry chimney chase that I've seen is supported by either wing walls or a bump out pocket in the foundation so that the load of the chimney is carried down to the spread footings. Occasionally, I'll see support walls that cut back to the foundation at a 45 degree angle. I have never seen anything like this before.

As I said in my original post, the frost line in Chicago is 45". The base of this chase terminated well above the frost line. My concern is that there may not be enough of a base to carry the load of the chase and secondly because of the depth to counteract frost heave.

This builder has taken numerous short cuts (as evidenced by the washed-out sewer line in a 3 year old house) so I am being overly suspicious of anything I find.

I'd really appreciate any comments if this is suspect and if so where I might go to find a code reference (if one exists) or if I'm making a mountain out of a mole hill.

Thanks,

Jeff

Link to post
Share on other sites

Well, I'm not an engineer, but if the concrete shelf is original work poured into the concrete foundation, which it appears to be, I wouldn't be too concerned. The photo you posted scales approximately 36" of vertical steel reinforced concrete before transitioning to the masonry chase. That's pretty substantial. Then the work above is tied together through the interlocking nature of masonry, so the entire support has to fail, before it becomes a serious event. Do keep in mind it's not a solid masonry chimney, which would be considerably heavier. It's merely a masonry chase, which is still heavy. It's pretty difficult to imagine a failure based upon those photos.

Also, keep in mind that a spread concrete footing is important when the soil is the reciever of the weight above, but that does not appear to be the case here.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...