Jump to content
Sign in to follow this  
Neal Lewis

Possible freon leak

Recommended Posts

I think the old refrigerants used an injected dye so leaks could be identified, and that dye color is usually an iridescent green. Freon is colorless, or so I've been told.

You might be seeing some residue from a dye injection.

I'd bet a tooth it isn't flux.

Share this post


Link to post
Share on other sites

I think the old refrigerants used an injected dye so leaks could be identified, and that dye color is usually an iridescent green. Freon is colorless, or so I've been told.

You might be seeing some residue from a dye injection.

I'd bet a tooth it isn't flux.

I wish I knew what it is. I sure would like to have a tooth as a trophy.

Share this post


Link to post
Share on other sites

I'd bet it was condensation taking some of the copper minerals with it when it dripped off the uninsulated refrigerant line. I've seen some around here where the refrigerant line doesn't fully cover the line (a 5 or six inch gap) feet away from the unit or any need for soldering. Just a solid line in that area, but the green stuff is still there on the insulation with no sign of a refrigerant leak. I've also seen the same green under copper water lines with no solder anywhere in sight.

Share this post


Link to post
Share on other sites

So tell us Marc, refrigerant line missing 6" to a foot of insulation in a straight run across the attic, no soldering anywhere near it. The same green stains on the wet fiberglass insulation under it, water dripping off the refrigerant line from condensation.

Where DOES the stain come from?

Don't leave Kurt's tooth hanging in the balance!

Share this post


Link to post
Share on other sites

There is sort of a drip pattern down the side of the side of the cabinet, a what looks like a drip epicenter there under the copper.

Could be. Maybe not.

I'm keepin' the tooth, regardless....

Share this post


Link to post
Share on other sites

So tell us Marc, refrigerant line missing 6" to a foot of insulation in a straight run across the attic, no soldering anywhere near it. The same green stains on the wet fiberglass insulation under it, water dripping off the refrigerant line from condensation.

Where DOES the stain come from?

Don't leave Kurt's tooth hanging in the balance!

Are you sure the liquid and vapor lines are not soldered just outside that unit?

Also, dye is inserted at the schrader ports on the outdoor section. That's usually the only place where ports are installed.

The stains could be the colored soap that techs use sometimes to check for leaks. It bubbles up at leaks. It would drip that way if sprayed at those solder joints. The brand I use now is approximately that color. I mean, how else is Kurt gonna keep that tooth? And who's got the gumption to go over there and knock it out?

Marc

Share this post


Link to post
Share on other sites

Didn't really need to do that, Nolan. It was Kurt's tooth they wanted anyway, not yours. And then, they only wanted ONE!

Share this post


Link to post
Share on other sites

There is sort of a drip pattern down the side of the side of the cabinet, a what looks like a drip epicenter there under the copper.

Could be. Maybe not.

I'm keepin' the tooth, regardless....

Pants on fire!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...