Jump to content

Notching a Header


Recommended Posts

Good afternoon ladies and gents. 

I am writing a report for a new build I inspected this afternoon and ran into a header that I am assuming (yes I know what they say about assuming) was notched to fit in a sliding glass door.  I am drawing a complete blank on coming up with reasoning why they shouldn't have done this.  I don't recall a code cite for headers offhand and I'm having issues finding much information online. 

I can't recall seeing a header notched before. Plenty of joists, beams and the like. At the worst they've poorly notched out approximately 2" from the doubled 2x8's.

Other than being a hack job can you learned gentlemen steer me in the right direction?  

IMG_7438.JPG

IMG_7439.JPG

Link to comment
Share on other sites

It looks like a wide header. Goes all the way from opening to top plates. Unless the opening is more than 4' wide, and there is no more than one story above it, I wouldn't make a fuss over it.

When I framed houses, we'd put the smallest header that was required, with the height of the opening a little higher, perhaps 3/4 inch, just to insure that we had plenty of room for whatever component as going to end up there. If it turned out to be too high, it's easy for the door guy to 'build it down' to whatever he wants.

Edited by Marc
Link to comment
Share on other sites

14 hours ago, Matthew Jardine said:

Not a pre-drywall inspection just a regular inspection on a brand new home.

Is this an unfinished basement then? In my area, a builder would never leave framing exposed like that - the home inspector could see way too much. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...