Jump to content

Vertical stucco cracks


Recommended Posts

Inspected a house today where there were several vertical cracks.Some were continuous from top to bottom.Most of the cracks were about 3 inches off the outcide corners of the house.There were two areas where the cracks were on the open wall and not near any corners or windows.All these were unusual since they went straight up the wall.Any ideas what is going on.Sorry no pics.I took some but the cracks did not show up in the picture.

Link to post
Share on other sites

Hi,

Well, it there are proper expansion and accessory joints and you're seeing curing cracks, then the base-coat mix was probably too watery and the whole lamina is shrinking. It's portland cement based, it's gotta crack someplace! That's what the accessory and expansion joints are for, but if they get the mix wrong it'll shrink and crack.

If these are hairline cracks the stucco manufacturer's association doesn't recommend screwing with them because a stucco wall, when done properly, is a rain screen wall and any water that gets in won't be a lot and will immediately be conveyed to the bottom of the lamina.

You can learn more here: http://www.stuccomfgassoc.com/about.html

OT - OF!!!

M.

Link to post
Share on other sites

This is a wood frame traditional stucco home about 5 years old.I look at these type homes all the time.Hairline cracks going in all directions are commonplace.These cracks were straight up and down.Which made them unusual.They were bigger than hairline cracks. My thoughts are that either the lath or the wall sheathing was installed wrong.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...