Jump to content

30 Amp Breaker Double Tapped With 2-12 gauge wires


Recommended Posts

Violation of Table 310.16 and /or 240.4(D)(5)

Even though the wire is twisted together, the wire itself is still only 12/2 NM (romex).

Do you have a photo of all the breakers in the panel?

I won't mention the Square-D breaker in a Cutler-Hammer panel.

Link to post
Share on other sites

Thanks for the replies.

Yes 3-double tapped circuit breakers in all, and the grounded conductors and ground wires are all under the same screws. I recommended a professional electrician be called in for these reasons and several other conditions I observed.

(The grounded conductors and ground wires are together on 95%+ of the main service panels I inspect in this area.)

This is the first time I have seen the doubled up 12 gauge wires on a 30 amp circuit breaker. I assumed it was wrong due to the fundamental reasons that both double tapping and 12 gauge on 30 amp circuit breakers are generally wrong, but no sense risking assumptions when I have this opportunity to run issues by the pros that monitor and contribute to this forum.

I figured one of the seasoned pros might chime in with an obscure rule exception where this would be acceptable and enlighten us all.

Link to post
Share on other sites

I believe that Cutler-Hammer makes some breakers that allows 2 wires on the breaker (15 amp)

The 30 amp is too large for the 12 gauge wire unless it is to a AC unit or a well pump that rated for that set up.

I bet someone need 10 gauge wire and ran two 12 so they would not have to go buy some 10.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...