Jump to content

Not real sure what to say


Recommended Posts

Inspection this morning on a home built in 1998, sold in 2000, and has been vacant for about 18 months or so. The bank did do some work to the interior of the residence such as replacing the carpet and lot's of ceiling repairs to the bedrooms.

The second floor has 3 bedrooms, 2 on either end and one in the middle. The ceiling in the 2 bedrooms on either end have "patches", identical where it appears something cylindrical was attached, approx 8-10" wide. The middle bedroom, has 2 small holes in the ceiling which attach to a vent tube, which exits through the roof via the attic area. The middle bedroom has a GFCI installed on the ceiling. One of the bedrooms directly above the garage has an electrical feed connected to a 30 amp breaker(not labeled) which comes up through the floor.

I am stumped. My initial thought was a grow operation, with ceiling vents installed. Anyone have an idea?

V/R

Click to Enlarge
tn_2009318184943_IMG_2089%20(Medium).jpg

19.25 KB

Click to Enlarge
tn_200931818508_IMG_2090%20(Medium).jpg

18.23 KB

Click to Enlarge
tn_2009318185029_IMG_2088%20(Medium).jpg

23.71 KB

Click to Enlarge
tn_2009318185110_IMG_2086%20(Medium).jpg

18.19 KB

Click to Enlarge
tn_2009318185218_IMG_2098%20(Medium).jpg

56.68 KB

Click to Enlarge
tn_2009318185236_IMG_2099%20(Medium).jpg

47.19 KB

Link to post
Share on other sites

Last time I saw that configuration it was a web based entertainment site. Owners had me as an expert witness vs contractor/mold expert. Owners were from Amsterdam and occupied the house three days per week. We won out of court.

It could be anything. Write that and don't suggest.

Link to post
Share on other sites

Hi,

It might just have been an ordinary house wherein someone installed some passive pull-string-operated fresh air vents in the ceilings and connected them to that attic ducting as a way to meet state ventilation requirements. The patched holes are just about the right size and it would have been a more reliable method of venting the bedrooms than relying on a 24-hour timer that someone is sure to screw with because they don't like the thought of sucking heated air out of their house for hours at a time. An amateur would probably install them in the ceiling versus the wall because it would be far easier than drilling 80mm holes through the side walls and then having to deal with sealing around the inlets.

ONE TEAM - ONE FIGHT!!!

Mike

Link to post
Share on other sites
  • 3 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...