I have a multifamily property where there is a 3 phase 120/208 distribution panel located at the end of each of the buildings. Each apartment unit of the buidling is assigned a single phase 200 Amp breaker utilizing a combination of either of the 3 phases A,B B,C or A,C . The breaker is then wired to a meter socket then feeds the inividual unit that has its own 200 AMP breaker panel inside the unit. My question is that the meter for each unit is a 120/240 V 200 AMP not a 120/208 200 AMP. I feel that the meters are not capturing all of the usage for the unit since my recovery for the property is far less than the recovery of the combined apartment units usage. All suggestions or comments will be greatly appreciated. Thanks, Kevin
