Jim Katen Posted November 1, 2010 Report Share Posted November 1, 2010 Does anyone happen to have a copy of Certainteed's installation instructions for their Weatherboards horizontal lap fibercement siding from 2004 or 2005? - Jim Katen, Oregon Quote Link to comment Share on other sites More sharing options...
patt Posted November 1, 2010 Report Share Posted November 1, 2010 I have the 11/03 instructions if that would help. Quote Link to comment Share on other sites More sharing options...
Chad Fabry Posted November 1, 2010 Report Share Posted November 1, 2010 Not to hijack the thread but I had to replace some Hardie smooth siding that I installed a few years ago because of some renovations. The new "zoned" hardie has a beveled drip edge and that wouldn't match the old square edged stuff on the house. I used the Certainteed product for the first time and I liked it. It's stiffer and easier to handle than Hardie, the edges are smoother and it doesn't have a totally stupid "nail here" line embossed on the face of the board which completely precludes cheating a few courses by an 1/8 to end up clean under a window or over a door. I had enough left over to install it on the ceiling below my balcony and now that it's painted, it's indistinguishable from wood planks. A Hardie rep informed me that they're going back to square edged product in 2011. Quote Link to comment Share on other sites More sharing options...
Jim Katen Posted November 1, 2010 Author Report Share Posted November 1, 2010 I have the 11/03 instructions if that would help. They'd help a great deal. Could you post them here or in the library, or email them to jim@benchmarkinspections.com ? Thanks, - Jim Katen, Oregon Quote Link to comment Share on other sites More sharing options...
Brandon Whitmore Posted November 1, 2010 Report Share Posted November 1, 2010 Here's one dated 11/02: http://www.cedarsidinginc.com/install_g ... stall1.pdf Quote Link to comment Share on other sites More sharing options...
patt Posted November 1, 2010 Report Share Posted November 1, 2010 I have the 11/03 instructions if that would help. They'd help a great deal. Could you post them here or in the library, or email them to jim@benchmarkinspections.com ? Thanks, - Jim Katen, Oregon Sent Quote Link to comment Share on other sites More sharing options...
Jim Katen Posted November 1, 2010 Author Report Share Posted November 1, 2010 I have the 11/03 instructions if that would help. They'd help a great deal. Could you post them here or in the library, or email them to jim@benchmarkinspections.com ? Thanks, - Jim Katen, Oregon Sent Received. Thanks Peter & Brandon. - Jim Katen, Oregon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.